AUSTRALIA-WIDE SHIPPING
cart Shopping Cart Shopping Cart
Australia's Widest Range Of Industrial Adhesives
 
Premium Quality Guaranteed
 
Bulk & Wholesale
Prices
 

TACHSEA

TACHSEA

Carton of 12 x CANTAC HSE-Tac Clear Aerosol Contact Adhesive 575ml NON-TOXIC

Carton of 12 x CANTAC HSE-Tac Clear Aerosol Contact Adhesive 575ml NON-TOXIC
larger imageMove mouse over the image to magnify
AU$348.00
excl GST
Qty.
non toxic stamp-376HSE-TAC is a premium low odour, high strength, high heat resistant contact spray adhesive with an extra-long working time formulated specifically for bonding Polyester wall coverings, acoustic and thermal insulation of all types, office partitions, High Pressure Laminates (HPL) to MDF, particleboard and plywood.

HSE-TAC contains no toxic methylene chloride commonly present in competing product so it is much safer to apply.

HSE-TAC is an excellent choice for applications requiring extended working times, high strength bonds, and a minimal odour.HSE-TAC is very versatile and is considered one of the flagship products within the CANTAC family of products.HSE-TAC will effectively bond Polyester Wall & Floor Coverings, High Pressure Laminates (HPL), MDF, particleboard and plywood, urethane foam, FRP, carpet, felt, fabrics, paper products, duct insulation, steel, aluminium, concrete, fiberglass, most plastics and many other materials.

COMMON USES
  • Bonds Polyester Wall & Floor Coverings
  • Bonds High Pressure Laminates (HPL)
  • Radius Edge Banding
  • Furniture & Upholstery
  • Automotive & Marine Headliners
  • Bonds a Variety of Carpets
  • Bonds Acoustic & Sound Deadening Materials
BONDS
HSE-TAC will effectively bond Polyester Wall & Floor Coverings, High Pressure Laminates (HPL), MDF, particleboard and plywood, urethane foam, FRP, carpet, felt, fabrics, paper products, duct insulation, steel, aluminium, concrete, fiberglass, most plastics and many other materials.

ADVANTAGES
  • Extra Long Open Time
  • Very Low Odour
  • High Heat Resistant
  • High Strength
  • Waterproof
  • No Ozone Depleting Substances
  • High Coverage
  • High Solids
  • Two Way Adjustable Nozzle
PREPARATION
For best results all surfaces to be bonded must be clean, dry and free from dirt, dust, oil, loose paint, wax and grease. The temperature of the adhesive and the surfaces being bonded should ideally be between 15°C - 27°C.

TECHNICAL DETAILS
  • Chemical Description: Solvent Based Contact Adhesive
  • Solids Content: 27 - 31%
  • Viscosity: Sprayable Grade
  • Minimum Open Time: 2 - 5 minutes
  • Maximum Open Time: 24 hours (best results within 1hr)
  • Heat Resistance: -40 – +120ºC
  • Cleaner: Citrus Cleaner or Acetone
  • Flash Point: Extremely Flammable
  • Specific Density: 0.70kg per ltr +/- 5%

APPEARANCE
  • Clear Sprayable Liquid
ODOUR
Minimal Solvent Odour

CLEAN UP
Clean tip after use with CANTAC Citrus Cleaner. Excess adhesive and overspray may be removed with CANTAC Citrus Cleaner, Acetone, WOODLOK GLAZE-AWAY & DSOLV-AWAY, GLUE GURU 05CR or most Industrial Solvents.

LIMITATIONS
HSE-TAC is not recommended for use on Polystyrene. HSE-TAC is not recommended for Vinyl Flooring.

TESTING
Always test the suitability of the product for your application before use.


COVERAGE
5m2 per Aerosol Can Single Sided (Guide only. Coverage depends on absorbency of surface and coating weight).

SIZES
  • 575ml Aerosol



A Material Safety Data Sheet will be supplied upon request, please click here ...
 

You might also be interested in ...